₹29,999.00
| Weight | 8.5 kg |
|---|---|
| Dimensions | 46 × 42 × 42 cm |
| MODEL Item # |
FX4 A214 |
FX6 A219 |
|---|
|
|
|
|
|---|---|---|
| UPC | 015561102148 | 015561102193 |
| Aquarium Capacity | 250 US Gal (1,000 L) |
400 US Gal (1,500 L) |
| Pump Output | 700 US Gal/h (2,650 L/h) |
925 US Gal/h (3,500 l/h) |
| Mechanical Area (foam) |
217 in2 (1,400 cm2) |
325.5 in2 (2,100 cm2) |
| Biological Volume | 1 US Gal (3.91 L) |
1.5 US Gal (5.9 L) |
| Filtration Volume | 3.7 US Gal (14 L) |
5.28 US Gal (20 L) |
| Filter Circulation | 450 US Gal/h (1,700 L/h) |
563 US Gal/h (2,130 L/h) |
| Head height (max.) |
6.9ft (2.1 m) |
10.8ft (3.3 m) |
| Wattage (120V/60Hz) |
30 W | 43 W |
| Wattage (230-240V/50Hz) |
30 W | 41 W |
| Dimensions (L x W x H) |
15.75 x 15.75 x 16.5″ (40 x 40 x 42 cm) |
15.75 x 15.75 x 20.8″ (40 x 40 x 53 cm) |
The Fluval FX4/FX6 High Performance Canister Filter is guaranteed against defects in material and workmanship under normal aquarium usage and service for 3 years from date of purchase. Non-replaceable and non-serviceable parts will be repaired or replaced at Rolf C. Hagen Inc.’s discretion, free of charge, when the complete filter is returned with all components along with a valid proof of purchase and postage paid. This warranty does not apply to any filter that has been subject to misuse, negligence or tampering. It does not apply to filters which have been incorrectly assembled or unsuitably maintained or where installation and maintenance instructions have not been followed correctly. The warranty does not apply to wear and tear parts such as the impeller, impeller cover or motor seal. No liability is assumed with respect to loss or damage to livestock or personal property irrespective of the cause thereof. Before returning the filter under warranty terms, please ensure that all setup and maintenance instructions have been followed. If you are in doubt, please contact your local aquatic specialist retailer for further advice before returning the product. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
No. Fluval canister filters use ribbed flexible hosing, which is not ideal for installing such equipment.
First, check your impeller and impeller shaft as it’s possible either of these are damaged and need to be replaced, or are very dirty and require cleaning. It’s also possible the impeller cover has not been reattached correctly. Finally, verify that the filter has been properly primed: always ensure that the filter output is above the water surface when priming.
This usually indicates an increased load on your filter due to either the growth of your fish, the recent introduction of additional fish, increased waste production (leftover food, excrement, etc.), or clogged filter media in need of replacement.
Air input into your system is most likely coming from the skimmer. Fine air bubbles are gathering in the canister filter and are being ejected in bursts. Consider adding a bubble trap for your skimmer.
This usually indicates an increased load on your filter due to either the growth of your fish, the recent introduction of additional fish, increased waste production (leftover food, excrement, etc.), or clogged filter media in need of replacement.
FX series filters are closed recirculation filter systems: head height has no real impact on performance. The length of tubing and the types of filter media are key factors affecting filter output performance. We recommend never exceeding the specified vertical distance in your instruction manual as this will cause the filter to exceed the maximum head pressure value, which could cause the filter to leak and fail.
No. It’s better (and easier) to prevent odors rather than having to remove them once they’ve accumulated. Some fish are messy eaters, or are more prone to producing large amounts of waste, so prevention is key.
Aquatic expert Tom Sarac discusses the 6 most common filter problems, while providing helpful troubleshooting tips to resolve them.
You don’t need to be concerned about your filter being too powerful for use with healthy fish, many of whom swim in natural habitats with much stronger currents. If a fish became stuck to the intake of your filter, it’s likely that the fish was already sick. Take note that you can adjust the filter output strength to suit your particular fish species.
Fluval Total Clear will crystallize the water and rapidly remove organics, providing better overall water quality. Also consider adding a coarse pre-filter media at the bottom of the filter to support improved long-term performance.
For aquariums with species that are strong feeders and fairly messy in nature (i.e. digging habits), we recommend using Fluval Fine-Filter pad and chemical media (i.e. carbon) at the bottom level, Fluval Bio-Max in the middle and Fluval Pre-filter rings at the top level.
Learn how to properly maintain your FX canister filter motor from Fluval’s head aquatic expert.
Learn valuable tips from our head aquatic expert on how to maintain and take care of your Fluval FX canister filter.
Noise originating from the motor suggests that the impeller assembly needs to be replaced. As the only moving part in your filter that operates 24 hours/day, the impeller does eventually wear and is therefore not covered under warranty. Also, verify that the filter has been properly primed (always ensure the filter output is above the water surface when priming), as this will help ensure trapped air is not the cause of the noise.
Aquatic expert Tom Sarac provides guidelines on knowing when to switch out the most common Fluval media for your aquarium filter.
FRESHWATER: It’s important to perform regular filter maintenance (media rinsing and replacement) to prevent media from compacting, which can result in air accumulation. Also make sure to verify the inlet rubber hose connector that attaches to the siphon tube, which does dry out over time and becomes hard and non-flexible, thus requiring periodic replacement.
SALTWATER: This is probably due to your filter taking in the fine air bubbles introduced to the aquarium by protein skimmers. Make sure to use an effective bubble trap at the skimmer output or within the sump to prevent this from happening.
You can safely turn down the output AquaStop by 50% in order to reduce flow without damaging the filter’s pump.
The leak is most likely from the canister O-ring. Before you purchase a replacement, remove and clean it with warm water. Thoroughly wipe the receiving groove in the filter with a soft cloth. Apply Fluval silicone lubricant (#A325) to the O-ring.
The water first moves to the bottom of the canister, and then rises to the top through the foam pads. It then passes back to the bottom of the canister through the media trays in the middle, before finally being returned to the aquarium.
Dog Food
Dog Treats
Birds Food
Catit smart feeders
Cat Toys
Drinking fountains and filters
Catit cat litter
Cat Food
Cat Treats
admin –
FX4 High Performance Canister Filter excellent product.
Shanu –
Very good product. But bit pricey but you get what you pay for. Cleans the tank in jiffy. If you have a large tank then this is a nice product.
Sushasu –
If you have a large tank then this is a nice product
Rakesh Bhatia –
Infact I was using FLUVAL 206 which lasted for 8 years with good service. Fx4 was purchased and installed in July 2022. Main advantage of Fx4 is large baskets for Chemical and Biomax filtration which gives large amount of good bacterias as well as Crystal Clear water. My tank capacity is around 75 gallons. The product is excellent and wonderful, deserves for 5 star rating. Moreover I got lot of co-operation from Mr. Rahul.