Plant 3.0 Bluetooth LED, 32W, 24-36″ / 61-85 cm

Plant 3.0 Bluetooth LED is designed for hobbyists who want to maintain a thriving live plant aquarium. Featuring free Fluval SmartApp technology, the light offers a variety of customizable options controlled via Bluetooth on your mobile device.

Features

1. Programmable, gradual 24-hour light cycle settings (sunrise, mid day, sunset and night)
2. 6 unique band waves for full spectrum results
3. Independent color control
4. Optional pre-set habitat light configurations (Lake Malawi, Tropical, Planted)
5. The new generation of H.T.E (High Thermal Efficiency) LEDs function at a higher operating temperature, providing improved long-term light output and spectral performance
6. Fully encased aluminum shell provides effective heat transfer and improved protection from water intrusion and humidity
7. 50% lighter, smoother frame than previous generation
8. Industry leading IP67 waterproof rating – light can be mounted directly above water surface for greater light penetration
9. Larger Touch-Switch surface and design offers stable control without any fuss
10. Wider coverage – each individual LED casts 120° of illumination for wider, uniform lighting without dead spots

 

SPECS

Warranty

3 YEAR LIMITED WARRANTY

Fluval Plant Spectrum LED is guaranteed against defects in material or workmanship under normal aquarium usage and service for 3 years. We reserve the right to repair or replace at our option. Failure of less than 5% of the total number of LEDS shall not be considered a defect under the terms of this warranty. This warranty does not apply to any light fixture that has been subjected to misuse, negligence or tampering or commercial use. No liability is assumed with respect to loss or damage to livestock or personal property irrespective of the cause thereof. This does not affect your statutory rights.

Manual

INSTRUCTION MANUAL

DOWNLOAD

FLUVALSMART APP MANUAL

DOWNLOAD

Video

FAQs

PLANT 3.0

Why does my LED light unit appear dimmer than when I bought it several months ago?

First, make sure your original light settings have not been dimmed. Next, verify if your lens has any accumulation of deposits (minerals, algae, etc.), which can significantly block light passage. If this is the case, use the Fluval Lens Cleaning Kit (#A3969) on a weekly basis to ensure you are keeping light levels consistent and maintaining optimal conditions for plant growth.

Is PAR value really important when it comes to aquarium lighting?

PAR is a measure of light energy present within the visible light spectrum. If you don’t have the required spectrum for your application, lighting power is certainly less important. Spectrum is the single most important parameter when considering lighting: color temperature and light intensity are secondary factors. To make PAR more relevant, be aware of the PAR value that the plant was grown under, and match that value.

How do I download the FluvalSmart App?

Search “FluvalSmart” and download the App for free in the Google Play store (Android) or App Store (iOS).

How do I locate and pair the light to my mobile device?

Click “+” and scan, select the device(s) that need to be added. Always make sure to select the red boxed check mark after selecting your light unit.

Why did my connection fail when I clicked on the paired light?

Try to reconnect first. If that fails, unplug or cut off the power to your device and make a reconnection once it’s turned on again.

How do I know if my light parameters are entered correctly?

When connected to the light, you can inspect the light setting parameters/time chart.

How do I save my light settings?

Click “Export” and save your customized settings.

Can I copy/paste my settings if I connect a 2nd light?

Yes. First, enter your desired light settings on the first light and save your profile (naming it “Light 1”, for example). Next, open the second light in the app. Select the Export feature, and you should see the name of your first light setting (“Light 1”) along with any other preset light profiles. Select “Light 1” and hit the Export command: both lights will now be using the same settings.

Can I view my settings before I make them live?

Yes, there is a “Preview” function for this purpose. After your settings are entered, Preview shows your 24-hour light schedule in one minute.

Can I undo or revert back to older light settings if I don’t like my newly entered parameters?

If you have saved your previous settings, you can return/import them. Otherwise, you will need to enter them manually again.

Is the FluvalSmart App compatible with all Android and iOS devices?

The FluvalSmart App supports Android systems above 4.3 and iOS systems above 8.0. With the abundance of phones on the market, Fluval cannot guarantee that all customers will have the same mobile app experience. Should you find any bugs, please contact us so we can debug and release an updated version.

The FluvalSmart app is requesting a password/pin number. What should I do?

The default password/pin number is 000000.

How will the light run after a sudden power failure?

If in Manual mode, the light will continue to operate as it was before powering down. If in Auto mode, once powered back on, the light will run starting from 00:00 and will require connection to a mobile device with the app to have its clock reset to the current time. If you are not present after a power failure, we recommend having someone with the app connect to your light unit and re-establish the correct time.

How can I identify one light if there are several paired lights together in a room?

There is a specific function to find your light. Click the magnifying glass icon in the top right corner and the lamp will flash to present itself.

What’s the remote distance to operate my light using a mobile device?

Around 40 feet (12 meters) or less.

What happens when I exit the App?

Whether it’s in Manual or Automatic mode, the LED iMap will continue to operate in the same mode it was in before you exited.

How can I manange my device list if there are too many devices showing?

How can I manage my device list if there are too many devices showing?

Can I connect a basic timer to this LED?

Yes, this is possible.

I purchased a new Bluetooth LED light and noticed the unit seems very warm to the touch, should I be concerned?

No. Depending on the specific environment and ambient room temperature in which your light units are in, the surface temperature of Bluetooth LED light units can be expected to operate between 105 deg. F (40 deg. C) and 135 deg. F (57 deg. C).

How many hours a day should I leave my aquarium lights on if I have live plants?

The typical photoperiod for live plants is 10 to 12 hours, however, keep in mind that different species of plants have different light level requirements.

Can I connect a basic analog / mechanical timer to this LED?

Yes, this LED is compatible with analog / mechanical timers.

How do I download the FluvalSmart app?

Search “FluvalSmart” and download the app for free from the Google Play store (Android) or App Store (iOS).

How do I locate my light bar and pair it with my mobile device?

Click “+” to scan, and select the device(s) that need to be added. Always make sure to first select the white box next to the light’s name, and then the red circle with the white check mark at the bottom of your screen.

I’m having trouble connecting my light to the FluvalSmart app. What should I do?

1. When connecting your mobile device to the FluvalSmart App, please use the following sequence: Open the app → Plug in the light unit → Find the light unit using the app.
2. If you own a Fluval Plant Spectrum or Marine Spectrum Bluetooth LED, make sure the touch-switch on the light unit is illuminated in green. If not, continue pressing the touch-switch until it does turn green and then re-attempt to connect the light to your mobile device using the FluvalSmart app.
3. Ensure that Bluetooth is enabled within your mobile device settings.
4. Make sure that Location Services is turned on in your mobile device settings.
5. If you have experienced a power failure or have unplugged the light unit, you must reconnect the light with your mobile device to reestablish the correct clock time as the light unit will otherwise default to midnight.
6. Try connecting another mobile device to your light unit to determine if the issue is caused by your mobile device or its operating system. Although many mobile devices have been tested with the FluvalSmart app, it is possible that newer operating systems are not yet compatible.
7. If you see several Bluetooth devices appearing on your device, try turning them off and reconnecting to your light unit.
8.  If none of the above tips help, uninstall the app from your mobile device and then reinstall the most current version available from Google Play or the App Store.

Is the FluvalSmart app compatible with all Android and iOS devices?

The FluvalSmart app supports Android systems above 4.3 and iOS systems above 9.0. With the abundance of phones on the market, Fluval cannot guarantee that all customers will have the same mobile app experience. Should you find any bugs, please contact us so we can debug and release an updated version.

How will the light run after a sudden power failure?

If in Manual mode, the light will continue to operate as it was before powering down. If in Auto or Pro mode, once powered back on, the light will run starting from 00:00 and will require connection to a mobile device with the app to have its clock reset to the current time. If you are not present after a power failure, we recommend having someone with the app connect to your light unit and re-establish the correct time.

How can I obtain support for the FluvalSmart app?

A playlist featuring step-by-step instructional videos for all Fluval Bluetooth LEDs and the FluvalSmart app can be found on our YouTube channel. You can also contact us at FluvalSmart@FluvalAquatics.com about the issues you’re experiencing.

How do I know if my light parameters are entered correctly?

When connected to the light, you can inspect the light setting parameters/time chart.

Can I view my settings before I make them live?

Yes, there is a “Preview” function for this purpose. After your settings are entered, Preview shows your 24-hour light schedule in one minute.

How do I save my light settings?

Click “Save” at the bottom of your screen to save your customized settings.

Can I copy/paste my settings if I connect a second light?

Yes, if both lights are the same model. First, enter your desired light settings on the first light and save your profile (naming it “Light 1”, for example). Next, open the second light in the app. Select the Export feature, and you should see the name of your first light setting (“Light 1”) along with any other preset light profiles. Select “Light 1” and hit the Export command: both lights will now be using the same settings.

Can I undo or revert back to older light settings if I don’t like my newly entered parameters?

If you have saved your previous settings, you can return/import them. Otherwise, you will need to enter them manually again.

How can I identify a particular light if there are several paired lights together in a room?

Click the three dots at the top right corner of the screen, and then “Find”. The lamp will flash to identify itself.

How can I manage my device list if there are too many devices showing?

If too many devices are showing in the device list, or you don’t need all of them any longer, you can swipe left on any row and select “Remove” to delete them.

What’s the maximum remote distance to operate my light using a mobile device?

Around 40 feet (12 meters).

What happens when I exit the App?

Whether it’s in Manual, Automatic, or Pro mode, the light unit will continue to operate in the same mode it was in before you exited.

CAN’T FIND AN ANSWER?

CONTACT US