₹19,999.00
As the world’s best-selling performance canister filter, the 7th generation 07 series features Fluval’s eTEC (Efficient Technology) state-of-the-art materials and design refinements which make them ultra-quiet, powerful, energy efficient and user friendly for aquariums 10 to 100 US Gal. (40-500 L).
| MODEL Item # |
107 A440 |
207 A443 |
307 A446 |
407 A449 |
|---|
|
|
|
|
|
|
|---|---|---|---|---|
| UPC | 015561104401 | 015561104432 | 015561104463 | 015561104494 |
| Aquarium Capacity* | 10-30 US Gal (40-130 L) |
20-45 US Gal (60-220 L) |
40-70 US Gal (90-330 L) |
50-100 US Gal (150-500 L) |
| Pump Performance | 145 US Gal/h (550 L/h) |
206 US Gal/h (780 L/h) |
303 US Gal/h (1150 L/h) |
383 US Gal/h (1450 L/h) |
| Vertical Pre-filter | 514 cm2 | 803 cm2 | 803 cm2 | 1074 cm2 |
| Basket Volume | 1.2 L | 1.8 L | 3.1 L | 4.2 L |
| Total Chamber Volume | 2.0 L | 3.1 L | 4.5 L | 6.0 L |
| Canister Volume | 3.9 L | 5.3 L | 7.3 L | 9.2 L |
| Filter Circulation** | 95 US Gal/h (360 L/h) |
121 US Gal/h (460 L/h) |
206 US Gal/h (780 L/h) |
245 US Gal/h (930 L/h) |
| Max Water Column Height | 1.45 m | 1.45 m | 1.75 m | 2.25 m |
| Wattage (120V/60 Hz) |
10 W | 10 W | 16 W | 23 W |
| Wattage (230-240V/50Hz) |
10 W | 10 W | 15 W | 20 W |
| Filter Dimensions (L x W x H) |
7.5 x 7 x 13.7” (19 x 18 x 35 cm) |
7.5 x 7 x 16.5” (19 x 18 x 42 cm) |
9.5 x 7 x 16.5” (24 x 18 x 42 cm) |
9.5 x 7 x 19.3” (24 x 18 x 49 cm) |
3 YEAR LIMITED WARRANTY (plus a 2-year extended warranty upon registration*)
Fluval 07 Series External Filters are warranted against defects in material and workmanship under normal aquarium usage and service for three (3) years from date of purchase. Non-replaceable and non-serviceable parts will be repaired or replaced at Hagen’s discretion, free of charge, when the complete filter is returned with all components along with a valid proof of purchase and postage paid. The warranty does not cover wear and tear parts such as the impeller assembly or motor seal ring. The warranty does not cover wear and tear or parts which have not been adequately or correctly maintained. The warranty is limited to repair or replacement only and does not cover consequential loss, loss or damage to livestock, personal property or damage to animate or inanimate objects, irrespective of the cause thereof. This warranty is valid only under normal operating conditions for which the unit is intended. This excludes any damage caused by unreasonable use, negligence, improper installation, tampering, abuse or commercial use. Before returning the filter under warranty terms, please ensure that all setup and maintenance instructions have been followed. If you are in doubt, please contact your local aquatic specialist retailer for further advice before returning the product. WARRANTY IS ONLY VALID WITH PROOF OF PURCHASE FROM AN AUTHORIZED FLUVAL DEALER. WARRANTY DOES NOT AFFECT YOUR STATUTORY RIGHTS.
*For more details visit: fluvalaquatics.com/warranty
We recommend a thorough cleaning of the motor head O-ring and applying Fluval silicone lubricant (#A325). It’s normal for the O-ring to require replacement after a few years of use. Ensure that the O-ring is inserted correctly into the motor head groove, and that the motor head is properly positioned, aligning the power cord with the notch on the canister.
Make an incision in the center of a coarse, open cell foam filter block and insert the siphon tube strainer into it. We recommend rinsing the block every 2 weeks to ensure proper filtration performance.
No. Fluval canister filters use ribbed flexible hosing, which is not ideal for installing such equipment.
First, check your impeller and impeller shaft as it’s possible either of these are damaged and need to be replaced, or are very dirty and require cleaning. It’s also possible the impeller cover has not been reattached correctly. Finally, verify that the filter has been properly primed: always ensure that the filter output is above the water surface when priming.
This usually indicates an increased load on your filter due to either the growth of your fish, the recent introduction of additional fish, increased waste production (leftover food, excrement, etc.), or clogged filter media in need of replacement.
The leak is most likely from the canister O-ring. Before you purchase a replacement, remove and clean it with warm water. Thoroughly wipe the receiving groove in the filter with a soft cloth. Apply Fluval silicone lubricant (#A325) to the O-ring.
07 series filters are closed re-circulation filter systems: head height has no real impact on performance. The length of tubing and the types of filter media are key factors affecting filter output performance. We recommend never exceeding the specified vertical distance in your instruction manual as this will cause the filter to exceed the maximum head pressure value, which could cause the filter to leak and fail.
No. It’s better (and easier) to prevent odours rather than having to remove them once they’ve accumulated. Some fish are messy eaters, or are more prone to producing large amounts of waste, so prevention is key.
You don’t need to be concerned about your filter being too powerful for use with healthy fish, many of whom swim in natural habitats with much stronger currents. If a fish became stuck to the intake of your filter, it’s likely that the fish was already sick. Take note that you can adjust the filter output strength to suit your particular fish species.
Fluval Total Clear will crystallize the water and rapidly remove organics, providing better overall water quality. Also consider adding a coarse pre-filter media at the bottom of the filter to support improved long-term performance.
FRESHWATER: It’s important to perform regular filter maintenance (media rinsing and replacement) to prevent media from compacting, which can result in air accumulation. Also make sure to verify the inlet rubber hose connector that attaches to the siphon tube, which does dry out over time and becomes hard and non-flexible, thus requiring periodic replacement.
SALTWATER: This is probably due to your filter taking in the fine air bubbles introduced to the aquarium by protein skimmers. Make sure to use an effective bubble trap at the skimmer output or within the sump to prevent this from happening.
Noise originating from the motor suggests that the impeller assembly needs to be replaced. As the only moving part in your filter that operates 24 hours/day, the impeller does eventually wear and is therefore not covered under warranty. Also, verify that the filter has been properly primed (always ensure the filter output is above the water surface when priming), as this will help ensure trapped air is not the cause of the noise.
No. Due to their shape, Bio-Foam Max filter pads can only be inserted on the left side of the Pre-Filter Cartridge, as the first filter media.
We recommend a thorough cleaning of the motor head O-ring and applying Fluval silicone lubricant (#A325). It’s normal for the O-ring to require replacement after a year of use. Ensure that the O-ring is inserted correctly into the motor head groove and that the motor head is properly positioned.
The output flow of Fluval 07 series canister filters can be safely reduced by up to 50%. In order to do this, move the white top lever of the AquaStop valve away from the red bottom lever, up to an angle of 45 degrees.
This white, slimy film is bio-film, and it is harmless. We recommend cleaning canister filter hosing and rubber hose connectors as part of normal maintenance to help mitigate the growth of bio-film.
Dog Food
Dog Treats
Birds Food
Catit smart feeders
Cat Toys
Drinking fountains and filters
Catit cat litter
Cat Food
Cat Treats
rishikesh prasad –
Excellent 307 Performance Canister Filter up to 70 US Gal (330 L) product.
Binay Kumar Bhagat –
Genuine and nice product. Works like charm
rajesh sharma –
My 307 Performance Canister Filter up and running right away!
admin –
Thank you for your valuable feedback.
admin –
Thank you for your valuable feedback.
David –
Best filter I’ve used….as long as you don’t do what I did.
Mark –
5 out of 5 stars My first canister filter. Loving it so far.
Jefi –
Quietest Filter I Have Ever Owned.
JAK85 –
You want a clean tank? Get this filter!
JAK85 –
I am very happy with this purchase. I wish I would have set this up sooner, honestly.